Internet Direct Connection (CLP-370/340, CLP-S308/S306)

Initializing Internet Settings

You can initialize the Internet settings.

Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).

Procedure

1.Select Function F9.7 (on the CLP-370/340) or F8.7 (on the CLP- S308/S306).

Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.7 (CLP- 370/340) or F8.7 (CLP-S308/S306).

2.Enter the Initializing mode.

Press the [+/YES] buttons.

A “CLr” message will appear on the display.

3.Confirm the initialization.

Press the [+/YES] button.

A “n y” appears in the display to confirm whether you wish to initialize or not.

If you do not want to initialize, press the [–/NO]button.

4.Execute the initialization.

Press again the [+/YES] buttons. Start the initialization.

When initialization is completed, an “End” message appears on the display.

5.Return to the Sub-modes Selection mode

Press the [+/YES] button to exit from the Sub-modes.

6.Exit from function mode

Press the [TEMPO/FUNCTION] button to exit from the Function modes.

CAUTION

Initializing restores the instrument to the factory-programmed settings for all Internet settings. Yamaha recommends you that you back up the Internet settings before initial- izing.

Internet Initial Settings List

The following are the default settings of this instrument.

DHCP

ON (available)

 

 

Wireless LAN

OFF (no settings)

 

 

Proxy server

OFF (no settings)

 

 

NOTE

The settings of the Internet are not initialized when using the “Initial- izing the data” on page 58.

NOTE

Information of the cookies will be initialized at the same time.

ENGLISH

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

55