Yamaha CLP-100, CLP-330, CLP-370, CLP-S306, CLP-S308 64

Detailed Settings – [FUNCTION]

F3. Dual Mode Functions

You can set various parameters for Dual mode to optimize the settings for the songs you play, such as adjusting the volume balance between two voices.

Dual mode function settings are set individually for each voice combination.

1.	Select the voices in Dual mode, then engage
	the Function mode and select	.
	the Function mode and select	.
2.	Press the [+/YES] button to engage the Dual
ENGLISH	YES] button to assign values.

mode function’s sub-mode, then use the [TEMPO/FUNCTION ▼, ▲] buttons to select the desired sub-mode. Press the [–/NO] [+/

NOTE

If Dual mode is not engaged, will appear instead of and you will be unable to select Dual mode functions.

In this case, you can switch to the Dual mode by selecting two voices.

Sub-mode

Dual Balance

Setting range: 0 – 20 (A setting of “10” produces an equal balance between the two Dual mode voices. Settings below “10” increase the volume of Voice 2 in relation to Voice 1, and settings above “10” increase the volume of Voice 1 in relation to Voice 2.)

Normal setting: Different for each voice combination. You can set one voice as the main voice, and another voice as a softer, mixed voice.

Dual Detune

Setting range: -20 – 0 – 20 (With positive values, the pitch of Voice 1 is raised and the pitch of Voice 2 is lowered. With negative values, the pitch of Voice 1 is lowered and the pitch of Voice 2 is raised.)

NOTE

The available setting range is wider in the lower range (± 60 cents for A -1), and narrower in the higher range (± 5 cents for C7). (100 cents equal one semitone.)

Normal setting: Different for each voice combination.

Detune Voice 1 and Voice 2 for Dual mode to create a thicker sound.

Voice 1 Octave Shift

Voice 2 Octave Shift

Setting range:	–1, 0, 1
Normal setting:	Different for each voice combination.

You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 independently. Depending on which voices you combine in Dual mode, the combination may sound better if one of the voices is shifted up or down an octave.

Voice 1 Effect Depth

Voice 2 Effect Depth

Setting range: 0 – 20

Normal setting: Different for each voice combination.

These functions make it possible to individually set the depth of the effect for Voices 1 and 2 for Dual mode. (The effect depth settings cannot be changed unless the [EFFECT] is ON. Function mode must be exited before the [EFFECT] can be turned ON.)

• “Voice 1” and “Voice 2” are explained on page 26.

Reset