Internet Direct Connection (CLP-370/340, CLP-S308/S306)

Other Internet Operations

Checking the version number of the instrument

You can check the version number of this instrument.

Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).

Procedure

1.Select Function [F9.4] (on the CLP-370/340) or F8.4 (on the CLP- S308/S306).

Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.4 (CLP- 370/340) or F8.4 (CLP-S308/S306).

2.Call up the version number.

Press the [+/YES] button so that the version number appears on the display. A “PrG” message and version number “x.xx” will appear alternately on the display.

3.Return to the Sub-modes Selection mode

Press the [+/YES] button to exit from the sub-modes.

4.Exit from the Function mode

Press the [TEMPO/FUNCTION] button to exit from function modes.

Checking the version number of the LAN Port driver

You can check the version number of the LAN Port driver.

Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).

Procedure

1.Select Function F9.5 (on the CLP-370/340) or F8.5 (on the CLP- S308/S306).

Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.5 (CLP- 370/340) or F8.5 (CLP-S308/S306).

2.Call up the version number.

Press the [+/YES] button so that the version number appears on the display. A “L-P” message and version number “x.x.x” will appear alternately on the display.

3.Return to the Sub-modes Selection mode

Press the [+/YES] button to exit from the Sub-modes.

4.Exit from function mode

Press the [TEMPO/FUNCTION] button to exit from the Function modes.

ENGLISH

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

53