CLP-370: Keyboard Stand Assembly
CAUTION
•Assemble the unit on a flat floor surface.
•Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence given below.
•Assembly should be carried out by at least two persons.
•Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product.
•Be sure to tighten all screws upon completing assembly of the unit.
•To disassemble the unit, reverse the assembly sequence given below.
Have a | ENGLISH |
|
Remove all parts from the package and make sure you have all of the items.
A
Foamed styrol pads
Remove foamed styrol pads from the package, position them on the floor, then place A on top of them.
Position the pads so that they will not block the speaker box on the bottom of A.
Assembly Parts |
|
6 x 25 mm long screws x 4 | 4 x 20 mm tapping |
| screws x 4 |
6 x 16 mm short screws x 6 | Cord holders x 2 |
4 x 12 mm thin screws x 2 |
|
B
C
Headphone hanger
4 x 10 mm thin screws x 2 | Headphone hanger |
A bundled pedal cord is attached to the reverse side.
Power cord
D E
81 | |
|
|