120
Playback Control
● Repeat Playback
Press the [>] button while holding the [SHIFT] button to
start repeat playback of the selected song. The repeat playback
symbol ( ) will appear in the upper right corner of the display
during repeat playback. In this mode the selected song will repeat
indefinitely untill stopped by pressing the [■] button.
● Measure Number
The measure number parameter on the display shows the
current measure number during song playback (and recording).
You can also place the cursor here and use the [-1] and [+1] but-
tons or the SHIFT-Number entry method (page 34) to enter any
measure number from which you want to start playback or
recording. The sequencer [r] and [f] buttons can be used to
step or scroll forward or backward through the song’s measures
no matter where the cursor is located.
● Jump Functions
For convenient navigation the QY100 has two “jump”
modes that let you jump to a specified measure number.
Jump Mode Symbol Function
Stop Jump When this mode is selected the QY100
will automatically jump to the specified
measure number whenever the
sequencer [■] (Stop) button is pressed.
Top Jump In this mode the QY100 will automati-
cally jump to the specified measure num-
ber when the sequencer [p] (Top) button
is pressed and the current measure num-
ber is greater than the specified jump
location. If the current measure number
is lower than the specified jump location
the QY100 will jump to the top of the
song (measure 001).
Jump Off [- -] The jump function is OFF.