The Song Voice Mode
137
The VARI. (variation effect) control appears either as a standard rotary
control or a switch, depending on how the variation effect block is “connected”
to the system in the EFFECT mode (“System” or “Insertion” — see page 239).
The effect controls — “REVERB”, “CHORUS”, and “VARI.” — set
the level of the corresponding effect for the corresponding parts. Position
the cursor at a control, then use [-1/NO] and [+1/YES] buttons or the SHIFT-
Number entry method (page 34) to set the corresponding effect level. The
graphic control will rotate to the corresponding position (clockwise for
higher level, and counter-clockwise for lower level). The control positions
also have numeric values (000 through 127) that appear at the top of the
display: “000” is no effect and “127” is maximum effect level. When the
VARIATION control appears as a switch, it simply turns the current variation
effect on or off (“E” appears in the switch when the variation effect is on).
The Mute/Solo and Voice selectors in the Effect Send display duplicate
those in the VOICE mode mixer display, and have exactly the same functions.
You can return to the SONG VOICE mixer display by pressing the
[EXIT] button.
.
■
NOTE
• The effect settings apply only to the QY100’s internal voices — i.e. they will not
affect the sound of an external tone generator or synthesizer being driven by the
QY100.
• When the “VARI.” control appears as a standard rotary control (i.e., the variation
effect block is connected as a “System” effect), the “DRY” rotary control also
appears to control “Dry/Wet” mixing of effects for each track.
When the “VARI.” control appears as a switch (i.e., the variation effect block is con-
nected as an “Insertion” effect), the “DRY” rotary control disappears. In this case,
“Dry/Wet” mixing can be controlled in the “Vari.Edit” of the Effect Editing display.
(page 240)
Effect send display
VARI. = System effect VARI. = Insertion effect