Yamaha QY100 17: Put Phrase

The Pattern Jobs
209
Copies the phrase data from a specified pattern track to the specified
measures in the specified track of a specified song.
The “Pattern TR” parameter specified the source pattern track: D1,
D2, PC, BA, C1, C2, C3, C4.
The “Song” parameter selects the destination song — i.e. the song
to which the phrase data is to be copied: “01” … “20”.
The “TR” parameter selects the destination song track — i.e. the
track to which the phrase data is to be copied: “01” … “16”.
The “M” parameter specifies the measure of the destination track to
which the phrase data is to be copied.
After setting the parameters as required press [ENTER] to execute
the Put Phrase job. The metronome icon will appear on the display while
the data is being processed, then “Completed !” will appear briefly when
the job is done. Press the [EXIT] button to return to the job list, or a mode
button to go directly to the selected mode.
■ NOTE
• The time signature of the phrase will not affect the time signature of the song.
• If the destination song track contains data, the copied phrase data will erase and
replace the previous song track data.
• The source pattern data is re-harmonized to the current chord specified in the PAT-
TERN play mode before being copied to the destination song track.
17: Put Phrase