The Pattern Jobs
201
Allows a specified type of event — note, program change, pitch
bend, control change, channel aftertouch, polyphonic aftertouch, or system
exclusive — to be extracted (removed) from a specified range of measures
in a specified track. The extracted data can be moved to the same range of
measures in any other specified track.
The upper “TR” parameter selects the source track — i.e. the track
from which the event data is to be extracted: D1, D2, PC, BA, C1, C2, C3,
C4.
The lower “TR” parameter selects the destination track — i.e. the
track to which the extracted event data is to be moved: D1, D2, PC, BA, C1,
C2, C3, C4, or “Off” if you simply want to discard the specified event data.
The “M” parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range from which the
event data is to be extracted.
The event type parameter near the upper graphic bar determines the
type of event data to be extracted:
11 : Extract Event
First measure Last measure
First beat Last beat
Event type
parameter