The Pattern Jobs
193
Transposes all notes in the specified part up or down by the specified
number of semitones.
The “TR” parameter selects the track to be affected by the Trans-
pose job: D1, D2, PC, BA, C1, C2, C3, C4.
The “M” parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be modified.
The “Note” parameters specify the range of notes to be affected.
The maximum range is from “C-2” to “G8”.
The “Transpose” parameter determines the amount of transposition
in semitone increments. Minus (-) values transpose down while plus (+) val-
ues transpose up. the range is from “-99” through “0” to “+99”.
After setting the parameters as required press [ENTER] to execute
the Transpose job. The metronome icon will appear on the display while the
data is being processed, then “Completed !” will appear briefly when the
job is done. Press the [EXIT] button to return to the job list, or a mode but-
ton to go directly to the selected mode.
05 : Transpose
First measure Last measure
First beat Last beat