Appendix
273
Playback does not start
when you press [>].
Does the selected song/pattern contain data? p.79, 98
Is the MIDI Sync set to external? p.247
Is Style Number 129 (End Pattern) selected in
the Song Modes display?
p.55
Cant change the length of a
pattern (number of mea-
sures).
The length of a pattern (number of measures)
cannot be changed, if it includes recorded user
phrases.
p.109
When a song is played
back, it stops in the middle.
Is Style Number 129 (End Pattern) set in the
middle of the Pattern Track?
p.84
Rhythm or note timing are
played back differently than
when recorded.
Are Play Effect settings being used? p.124
The same amount of force
is used to play notes on the
keyboard but it results in
notes of different loudness.
Is the keyboard velocity set between R1 and
R4 (Random)?
p.106, 117
Cannot use the Fingered
Chord function.
Is the Fingered Chord turned off? p.69
Are you pressing keys within the Fingered
Zone?
p.252
Cant hear the click sound. Is the click set to something other than off
in the Utility mode?
p.244
When the song starts, the
voice or effect settings that
you have made disappear.
Does the beginning of the song contain data
which resets the tone generator?
p.216
If there is data in the Pattern track, the Varia-
tion effect settings for the pattern will be
effective.
p.241
The Memory Full mes-
sage appears yet there are
still unused songs.
Press the [SHIFT] button and the second function button from the top simultaneously to check the current memory capacity. The QY100s memory capacity (approximately 32,000 notes) is for the total data of all songs and phrases. This means that if there are songs or phrases that contain large amounts of data, the memory may be full even though there are still unused songs or patterns.
p.23
The QY100 (tone generator)
is slaved to an external
sequencer but, there is no
sound when the perfor-
mance is played back from
the external sequencer.
Is the Utility modes MIDI Echo Back set to
RecMontr? Change the Echo Back setting to
Off or Thru.
p.248
Nothing is shown on the
LCD.
Is the Contrast control properly set? p.20
Problem Possible causes Refer to page