Guided Tour
Guided Tour
Add Some Details to Complete the Accompaniment
79
nStop RecordingPress the [■] button to stop recording and return to the
SONG mode. Note than when you return to the SONG play mode
a bar will appear below each track that contains data. This is the
lowest segment of a “velocity meter” which will indicate velocity
levels in the track during playback.
mRecord the Next TrackPress the [●] button to engage the record ready mode
again (the “REPL” or “OVER” record mode will still be selected
— leave this setting as is or change as necessary), then move the
cursor to the track area of the display and select the next track to
record (in this case, track 2).
Press the [>] button to begin recording, and record the
next track in the same as the first track described above.
■
NOTE
• To extend this process to record a complete song on the QY100
sequencer tracks, simply assign the voices for your tracks and record as
many as your song needs (up to 16, of course) one after the other.
• Use the SONG JOBS (page 145) to make further adjustments to your
recorded tracks, as necessary. If your timing is a little off, for example,
use the “Quantize” job to pull everything into line. Take a look at the
SONG JOB LIST on page 146 for an idea of the types of jobs that are
available.
Recorded
track