Yamaha QY100 02 : Modify Velocity

The Song Jobs
151
Increases or decreases the velocity values of all notes in the speci-
fied track and range of measures.
The “ TR ” parameter selects the track to be affected by the Modify
Velocity job: “01” … “16”.
The “ M ” parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be modified.
The “ SetAll ” parameter makes it possible to set all notes in the
specified range to a single velocity value from “1” to “127”. “Set All” can
also be turned “Off” when the “Rate” and “Offset” parameters, below,
are to be used for velocity modification.
The “ Rate ”
parameter allows you to
change the Velocity
value of each note with-
out affecting the velocity
ratios between notes
(proportional change). A
setting of “100%” main-
tains the absolute veloc-
ity differences between
notes, while lower
(higher) values will
decrease (increase) the velocity values to the corresponding percentage,
resulting in a narrower (wider) dynamic range. The range is from “0%” to
“200%”.
02 : Modify Velocity
First measure Last measure
First beat Last beat
96 64 32 127 96
48 32 16 63 48
127 96 48 127 127
Original
velocities
Rate = 50%
Rate = 150%