Yamaha QY100 Error Messages

274

Appendix

No Data When a job is executed, this will appear if the selected track or area

contains no data, making the job invalid. Re-select the area.

Illegal Input This will appear in response to inappropriate operation or input. Check

your input method.

Preset Phrase

This will appear when you attempt to edit a Preset Phrase. To edit a preset

phrase, copy the phrase to a User Phrase and edit the User Phrase.

Preset Pattern This will appear when you attempt to record to a Preset Pattern. You

cannot record to Preset Patterns.

Preset Chord This will appear when you attempt to change a Preset Chord Template

with a Job (transpose, etc.) operation.

Now Bulk Mode This will appear when you attempt to operate the QY100 while it is

receiving bulk data.

Memory Full A song ﬁle or style ﬁle could not be loaded because the QY100’s inter-

nal memory is full.

Delete unwanted song and/or style ﬁles to increase the amount of

available memory. When a song or style ﬁle is loaded and previous

data in the destination song or style ﬁle will be erased.

A song ﬁle or style ﬁle could not be loaded because the QY100's inter-

nal memory is not enough.

Delete unwanted song and/or style ﬁles to increase the amount of

available memory. When a song or style ﬁle is loaded, previous data in

the destination song or sytle ﬁle will not be erased.

Backup Batt.Low This will appear when the internal backup battery of the QY100 has run

down. Contact the nearest Yamaha dealer or the authorized distributor

for your country to have the battery replaced.

Power Batt.Low This will appear when the batteries (Size AA x6) powering the QY100

has run down. When the batteries run down more seriously, "Power

Batt.End" message will appear.

Power Batt.End This will appear when the batteries (Size AA x6) powering the QY100

has run down seriously. In this case, memory card functions are no

longer accessible. Replace the entire set of old batteries with a new

set of batteries as soon as possible.

Factory Set

After the power is switched ON, a system diagnosis is run on the QY100’s

system. If the diagnosis ﬁnds the RAM to be defective, this message will

appear and the memory will be reset to its original factory settings. Data

for Song, User Patterns, and User Phrases will all be eliminated.

MIDI Data Error This will appear when the received QY bulk data contains an error.

Now Running This will appear when the QY100 is receiving bulk data. Other MIDI

signals cannot be received at this time.

Error Messages