52
For Singers: Cool Vocal Processing
The “On/Off” Parameter
At the very bottom of the parameter list is the On/Off
parameter. This parameter allows you to select a specic block to
be turned on and off by the [AMP SIMULATOR] button on the top
panel, or a footswitch connected to the rear-panel FOOT SW jack
(when the footswitch is assigned to amp simulator section
switching via the UTILITY parameter described on page 245).
Theres also an ALL setting which allows all blocks to be turned
on or off. When the selected block(s) are bypassed (off), the indi-
cator to the right of the [AMP SIMULATOR] button will go out).
The settings are:
DLY The footswitch or [AMP SIMULATOR] button turns
only the Delay block on and off.
CHO The footswitch or [AMP SIMULATOR] button turns
only the Chorus block on and off.
REV The footswitch or [AMP SIMULATOR] button turns
only the Reverb block on and off.
ALL The footswitch or [AMP SIMULATOR] button turns all
three blocks Delay, Chorus, and Reverb on and
off.
Reverb block
parameter
On/Off parameter