Zebra Technologies Z4Mplus PLUS, PLUS, SELECT, Range:, SELECT, SELECT, Range:, SELECT, Default:, Default:, Control Prefix Character: Press MINUS (–)to move to

Configuration

Configuration and Calibration Sequence

Display Shows Action/Explanation

Selecting Prefix and Delimiter Characters

Prefix and delimiter characters are 2-digit hex values used within the ZPL/ZPL II formats sent to the printer. The printer uses the last prefix and delimiter characters sent to it, whether from a ZPL II instruction or from the front panel.

DO NOT use the same hex value for the control, format, and delimiter character. The printer needs to see different characters to function properly.

CONTROL PREFIX	Press SELECT to make change.
	Control Prefix Character: Press MINUS (–) to move to
	the next digit position, press PLUS (+) to increase the value
	of the digit.
	Default: 7E (tilde - displayed as a black square)
	Range: 00 to FF
	Press SELECT to accept the change.
	The printer looks for this 2-digit hex character to indicate the
	start of a ZPL/ZPL II control instruction.
FORMAT PREFIX	Press SELECT to make change.
	Format Prefix Character: Press MINUS (–) to move to the
	next digit position, press PLUS (+) to increase the value of
	the digit.
	Default: 5E (caret)
	Range: 00 to FF
	Press SELECT to accept the change.
	The printer looks for this 2-digit hex character to indicate the
	start of a ZPL/ZPL II format instruction.

Z4Mplus and Z6Mplus User Guide 75