Troubleshooting

Printer Diagnostics

Pause Self Test

This self test can be used to provide the test labels required when making adjustments to the printer’s mechanical assemblies. See the sample printout at right.

Perform the following procedure to complete the Pause Self Test:

1.Turn the printer Off (O).

2.Press and hold PAUSE while turning the printer On (l).

3.Release PAUSE after the DATA light turns off (approximately five seconds).

•The initial self test prints 15 labels at 2 in. (51 mm) per second, then automatically pauses the printer. When PAUSE is pressed, an additional 15 labels print.

•Pressing CANCEL while the printer is paused alters the self test. When PAUSE is pressed, the printer prints 15 labels at 6 in. (152 mm) per second.

•Pressing CANCEL again while the printer is paused alters the self test again. When PAUSE is pressed, the printer prints 50 labels at 2 in. (51 mm) per second.

•Pressing CANCEL again while the printer is paused alters the self test a third time. When PAUSE is pressed, the printer prints 50 labels at 6 in. (152 mm) per second.

•Pressing CANCEL again while the printer is paused alters the self test a fourth time. When PAUSE is pressed, the printer prints 15 labels at the printer’s maximum speed.

•To exit this self test at any time, press and hold CANCEL.

110

Z4Mplus and Z6Mplus User Guide