Zebra Technologies Z4Mplus PLUS, SELECT, Range:, SELECT, SELECT, SELECT, Default:, Default: ZPL, Selections: ZPL II, ZPL, Selecting ZPL Mode: Press PLUS (+) or MINUS (–)to

Configuration

Configuration and Calibration Sequence

Display Shows	Action/Explanation
DELIMITER CHAR	Press SELECT to make change.
	Delimiter Character: Press MINUS (–) to move to the next
	digit position, press PLUS (+) to increase the value of the
	digit.
	Default: 2C (comma)
	Range: 00 to FF
	Press SELECT to accept the change.
	The delimiter character is a 2-digit hex value used as a
	parameter place marker in
	ZPL/ZPL II format instructions. See the ZPL II
	Programming Guide Volume I for more information.
Selecting ZPL Mode
ZPL MODE	Press SELECT to make change.
	Selecting ZPL Mode: Press PLUS (+) or MINUS (–) to
	display other choices.
	Default: ZPL II
	Selections: ZPL II, ZPL
	Press SELECT to accept the change.
	The printer remains in the selected mode until it is changed
	by this front panel instruction or by using a ZPL/ZPL II
	command. The printer accepts label formats written in either
	ZPL or ZPL II. This eliminates the need to rewrite any ZPL
	formats you already have. See the ZPL II Programming
	Guide Volume II for more information on the differences
	between ZPL and ZPL II.

76 Z4Mplus and Z6Mplus User Guide