Zebra Technologies Z4Mplus PLUS, PLUS, PLUS, MINUS, MINUS, MINUS, SELECT, SELECT, SELECT, SELECT, SELECT, SELECT, SELECT, Example:, Default:, RTC Date:, RTC Time:, Selections:

Configuration

Configuration and Calibration Sequence

Display Shows	Action/Explanation
FORMAT CONVERT	Press SELECT to make change.
	Note • The Format Convert setting is used when upgrading
	from a printer of lower resolution to a printer of higher
	resolution and the user does not wish to modify their
	formats.
	Example: If your original formats were written for a 150 dpi
	printer and your new printer is 300 dpi, you would
	choose150-300.
	Format Convert: Press PLUS (+) or MINUS (–) to display
	other choices.
	Default: None
	Selections: None, 150–300, 150–600, 200–600, 300–600
	Press SELECT to accept the change.
IDLE DISPLAY	If RTC is installed.
	Idle Display: Press SELECT to change. Press PLUS (+) or
	MINUS (–) to display other chooses.
	Default: FW Version
	Selections: FW Version, MM/DD/YY 24HR, MM/DD/YY
	12HR, DD/MM/YY 24HR, DD/MM/YY 12HR
	Press SELECT to accept the change.
	This parameter selects the LCD options for the real-time
	clock.
RTC DATE	If RTC is installed.
	RTC Date: Press SELECT to change. Press PLUS (+) to
	change value, press MINUS (–) to change position.
	This parameter allows changing of the date.
RTC TIME	If RTC is installed.
	RTC Time: Press SELECT to change. Press PLUS (+) to
	change value, press MINUS (–) to change position.
	Press SELECT to accept the change.
	This parameter allows changing of time.

80 Z4Mplus and Z6Mplus User Guide