Printer Basics

Load the Ribbon

Remove the Ribbon

1.If the ribbon has not run out, break it between the strip plate and the ribbon take-up spindle.

2.While turning the ribbon take-up spindle release knob counter clockwise, squeeze the ribbon against the ribbon take-up spindle tension blades.

3.When the tension blades collapse into the ribbon take-up spindle, hold the release knob and rotate the spent ribbon toward the rear of the printer. Then, slide off the ribbon.

Note • Do not cut the ribbon on the ribbon take-up spindle. This may damage the spindle.

56

Z4Mplus and Z6Mplus User Guide