Configuration

Configuration and Calibration Sequence

Display Shows

Action/Explanation

 

Label Positioning Parameters

BACKFEED

Press SELECT to make change.

 

Backfeed Sequence: Press PLUS (+) or MINUS (–) to

 

display other choices.

 

Default: Default (90%)

 

Selections: Default, after, before, 10%, 20%, 30%, 40%,

 

50%, 60%, 70%, 80%, off

 

Press SELECT to accept the change.

 

This parameter establishes when and how much label

 

backfeed occurs after a label is removed or cut in the peel-

 

off or cutter modes. It has no effect in rewind or tear-off

 

modes. This parameter setting can be superseded by the ~JS

 

instruction when received as part of a label format (see the

 

ZPL II Programming Guide Volume I).

 

The difference between the value entered and 100%

 

establishes how much backfeed occurs before the next label

 

is printed. For example, a value of 40 means that 40% of the

 

backfeed takes place after the label is removed or cut. The

 

remaining 60% takes place before the next label is printed. A

 

value of “before” means that all backfeed takes place before

 

the next label is printed.

LABEL TOP

Press SELECT to make change.

Adjusting Label Top Position: Press PLUS (+) to increase the value, press

MINUS (–) to decrease the value. The displayed value represents dots.

Default: +0

Range: –120 to +120 dot rows

Press SELECT to accept the change.

The label top position adjusts the print position vertically on the label. Positive numbers adjust the label top position further down the label (away from the printhead); negative numbers adjust the position up the label (toward the printhead).

78

Z4Mplus and Z6Mplus User Guide