Zebra Technologies Z4Mplus SELECT, SELECT, SELECT, SELECT, SELECT, SELECT, Default:, Selections:, Selections:, Selections:, Default: All, Default: Dynamic

Configuration

Configuration and Calibration Sequence

Display Shows	Action/Explanation
PASSWORD LEVEL	Press SELECT to make change.
	Password Level: Press PLUS (+) or MINUS (–) to display
	other choices.
	Default: Selected items
	Selections: Selected items, all items
	Press SELECT to accept the change.
	This parameter allows you to select whether certain
	Zebra-selected menu items (selected items) or all menu
	items (all items) are password protected.
IP RESOLUTION*	Press SELECT to make change.
	IP Resolution: Press PLUS (+) or MINUS (–) to display
	other choices.
	Default: Dynamic
	Selections: Dynamic, permanent
	Press SELECT to accept the change.
	Depending on the selection, allows either the user
	(permanent) or the server (dynamic) to select the IP address.
	For more information, see ZebraNet Networking:
	PrintServer II Installation and Users Guide.
IP PROTOCOLS*	Press SELECT to make change.
	IP Protocols: Press PLUS (+) or MINUS (–) to display
	other choices.
	Default: All
	Selections: All, gleaning only, RARP, BOOTP, DHCP,
	DHCP/BOOTP
	Press SELECT to accept the change.

If dynamic was chosen in the previous parameter, this selection determines the method(s) by which the PrintServer

IIreceives the IP address from the server. For more information, see ZebraNet Networking: PrintServer II Installation and Users Guide.

Z4Mplus and Z6Mplus User Guide 81