Zebra Technologies Z4Mplus SELECT, SELECT, SELECT, SELECT, Default:, Selections:, Default: Web, Selections: Web, mark, Setting Media Type: Press PLUS (+) or MINUS (–)to

Configuration

Configuration and Calibration Sequence

Display Shows	Action/Explanation
MEDIA TYPE	Press SELECT to make change.
	Setting Media Type: Press PLUS (+) or MINUS (–) to
	display other choices.
	Default: Non-Continuous
	Selections: Non-continuous, Continuous
	Press SELECT to accept the change.
	This parameter tells the printer the type of media you are
	using. Selecting continuous media requires that you include
	a label length instruction in your label format (^LLxxxx if
	you are using ZPL or ZPL II).
	When non-continuous media is selected, the printer feeds
	media to calculate label length (the distance between two
	detections of the inter-label gap, webbing, or alignment
	notch or hole).
SENSOR TYPE	Press SELECT to make change.
	Setting the Sensor Type: Press PLUS (+) or MINUS (–) to
	display other choices.
	Default: Web
	Selections: Web, mark
	Press SELECT to accept the change.
	This parameter tells the printer whether you are using media
	with a web (gap or space between labels, notch, or hole) to
	indicate the separation between labels or if you are using
	media with a black mark printed on the back. If your media
	does not have black marks on the back, leave your printer at
	the default setting (web).

Z4Mplus and Z6Mplus User Guide 63