ZyXEL Communications metrogigabit switch manual 128

Chapter 9 VLAN

Note: Subnet based VLAN applies to un-tagged packets and is applicable only when you use IEEE 802.1Q tagged VLAN.

Figure 53 Advanced Application > VLAN > VLAN Port Setting > Subnet Based

VLAN

The following table describes the labels in this screen.

Table 19 Advanced Application > VLAN > VLAN Port Setting > Subnet Based VLAN Setup

LABEL	DESCRIPTION
Active	Check this box to activate this subnet based VLANs on the Switch.
DHCP-Vlan	When DHCP snooping is enabled DHCP clients can renew their IP address
Override	through the DHCP VLAN or via another DHCP server on the subnet based
	VLAN.
	Select this checkbox to force the DHCP clients in this IP subnet to obtain
	their IP addresses through the DHCP VLAN.
Apply	Click Apply to save your changes to the Switch’s run-time memory. The
	Switch loses these changes if it is turned off or loses power, so use the
	Save link on the top navigation panel to save your changes to the non-
	volatile memory when you are done configuring.
Active	Check this box to activate the IP subnet VLAN you are creating or editing.
Name	Enter up to 32 alpha numeric characters to identify this subnet based
	VLAN.
IP	Enter the IP address of the subnet for which you want to configure this
	subnet based VLAN.

128

MGS3700-12C User’s Guide