ZyXEL Communications metrogigabit switch manual Bandwidth Control Setup, 170

Chapter 14 Bandwidth Control

14.2 Bandwidth Control Setup

Click Advanced Application > Bandwidth Control in the navigation panel to bring up the screen as shown next.

Figure 78 Advanced Application > Bandwidth Control

The following table describes the related labels in this screen.

Table 34 Advanced Application > Bandwidth Control

LABEL	DESCRIPTION
Active	Select this check box to enable bandwidth control on the Switch.
Port	This field displays the port number.
*	Settings in this row apply to all ports.
	Use this row only if you want to make some settings the same for all ports.
	Use this row first to set the common settings and then make adjustments
	on a port-by-port basis.

	Note: Changes in this row are copied to all the ports as soon as you
	make them.
Ingress
Rate
Active	Select this check box to activate commit rate limits on this port.
Commit	Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for
Rate	the incoming traffic flow on a port. The commit rate should be less than the
	peak rate. The sum of commit rates cannot be greater than or equal to the
	uplink bandwidth.
Commit	Specify the number of committed bits allowed to be sent per interval (Tc) to
Burst	conform with the target-rate (CIR) per second.

170

MGS3700-12C User’s Guide