ZyXEL Communications metrogigabit switch Configuring Vlan Mapping, 301, Translated VID field

Chapter 28 VLAN Mapping

28.3 Configuring VLAN Mapping

Click the VLAN Mapping Configure link in the VLAN Mapping screen to display the screen as shown. Use this screen to enable and edit the VLAN mapping rule(s).

Figure 149 VLAN Mapping Configuration

The following table describes the labels in this screen.

Table 95 VLAN Mapping Configuration

LABEL	DESCRIPTION
Active	Check this box to activate this rule.
Name	Enter a descriptive name (up to 32 printable ASCII characters) for
	identification purposes.
Port	Type a port to be included in this rule.
VID	Enter a VLAN ID from 1 to 4094. This is the VLAN tag carried in the
	packets and will be translated into the VID you specified in the
	Translated VID field.
Translated VID	Enter a VLAN ID (from 1 to 4094) into which the customer VID carried in
	the packets will be translated.
Priority	Select a priority level (from 0 to 7). This is the priority level that replaces
	the customer priority level in the tagged packets or adds to the untagged
	packets.
Add	Click Add to insert the entry in the summary table below and save your
	changes to the Switch’s run-time memory. The Switch loses these
	changes if it is turned off or loses power, so use the Save link on the top
	navigation panel to save your changes to the non-volatile memory when
	you are done configuring.
Cancel	Click Cancel to reset the fields to your previous configuration.
Index	This is the number of the VLAN mapping entry in the table.
Active	This shows whether this entry is activated or not.
Name	This is the descriptive name for this rule.
Port	This is the port number to which this rule is applied.

MGS3700-12C User’s Guide

301