ZyXEL Communications metrogigabit switch manual 275, IP Source Guard Static Binding

Chapter 26 IP Source Guard

new static binding replaces the original one. To open this screen, click Advanced Application > IP Source Guard > Static Binding.

Figure 131 IP Source Guard Static Binding

The following table describes the labels in this screen.

Table 82 IP Source Guard Static Binding

LABEL	DESCRIPTION
MAC Address	Enter the source MAC address in the binding.
IP Address	Enter the IP address assigned to the MAC address in the binding.
VLAN	Enter the source VLAN ID in the binding.
Port	Specify the port(s) in the binding. If this binding has one port,
	select the first radio button and enter the port number in the field
	to the right. If this binding applies to all ports, select Any.
Add	Click this to create the specified static binding or to update an
	existing one.
Cancel	Click this to reset the values above based on the last selected
	static binding or, if not applicable, to clear the fields above.
Clear	Click this to clear the fields above.
Index	This field displays a sequential number for each binding.
MAC Address	This field displays the source MAC address in the binding.
IP Address	This field displays the IP address assigned to the MAC address in
	the binding.
Lease	This field displays how long the binding is valid.
Type	This field displays how the Switch learned the binding.
	static: This binding was learned from information provided
	manually by an administrator.
VLAN	This field displays the source VLAN ID in the binding.
Port	This field displays the port number in the binding. If this field is
	blank, the binding applies to all ports.

MGS3700-12C User’s Guide

275