ZyXEL Communications metrogigabit switch manual 238, Vid

Chapter 23 VLAN Stacking

Table 65 Advanced Application > VLAN Stacking > Selective QinQ (continued)

LABEL	DESCRIPTION
Priority	Select a priority level (from 0 to 7). This is the service provider’s priority level
	that adds to the frames received on this port.
	"0" is the lowest priority level and "7" is the highest.”No change” do not change
	the frame’s priority on this port.
Add	Click Apply to save your changes to the Switch’s run-time memory. The Switch
	loses these changes if it is turned off or loses power, so use the Save link on
	the top navigation panel to save your changes to the non-volatile memory
	when you are done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.
Index	This is the number of the selective VLAN stacking rule.
Active	This shows whether this rule is activated or not.
Name	This is the descriptive name for this rule.
Port	This is the port number to which this rule is applied.
VID	This is the customer VLAN ID in the incoming packets.
SPVID	This is the service provider’s VLAN ID that adds to the packets from the
	subscribers.
Priority	This is the service provider’s priority level in the packets.
Delete	Check the rule(s) that you want to remove in the Delete column and then click
	the Delete button.
Cancel	Click Cancel to clear the Delete check boxes.

238

MGS3700-12C User’s Guide