ZyXEL Communications metrogigabit switch manual Tutorials

Chapter 6 Tutorials

3The Intermediate Agent screen appears. Click VLAN on the top of the screen.

4Enter 1 for both Start VID and End VID. Click Apply.

5Then select Yes to enable PPPoE IA in VLAN 1 and also select Circuit-idand Remote-idto allow the Switch to add these two strings to frames tagged with VLAN 1 and pass to the PPPoE server. Click Apply.

The settings are completed now. If you miss some settings above, subscriber C could not successfully receive an IP address assigned by the PPPoE Server. If this happens, make sure you follow the steps exactly in this tutorial.

MGS3700-12C User’s Guide

77