ZyXEL Communications metrogigabit switch manual TACACS+ Server Setup, 259

	Chapter 25 AAA
Table 73 Advanced Application > AAA > RADIUS Server Setup (continued)
LABEL	DESCRIPTION
Shared Secret	Specify a password (up to 32 alphanumeric characters) as the key to be
	shared between the external RADIUS accounting server and the Switch.
	This key is not sent over the network. This key must be the same on the
	external RADIUS accounting server and the Switch.
Delete	Check this box if you want to remove an existing RADIUS accounting
	server entry from the Switch. This entry is deleted when you click Apply.
Apply	Click Apply to save your changes to the Switch’s run-time memory. The
	Switch loses these changes if it is turned off or loses power, so use the
	Save link on the top navigation panel to save your changes to the non-
	volatile memory when you are done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.

25.2.2 TACACS+ Server Setup

Use this screen to configure your TACACS+ server settings. See Section 25.1.2 on page 256 for more information on TACACS+ servers. Click on the TACACS+ Server Setup link in the AAA screen to view the screen as shown.

Figure 126 Advanced Application > AAA > TACACS+ Server Setup

MGS3700-12C User’s Guide

259