ZyXEL Communications P-2302HW-P1 Series, P-2302HWL-P1 Series 6.2.4 WAN Advanced Screen, Network > WAN > Advanced

P-2302HW/HWL-P1 Series User’s Guide

Table 45 Network > WAN > Internet Connection (PPPoE)

LABEL	DESCRIPTION
Get automatically	Select this if your ISP did not assign you a static IP address.
from ISP
Use Fixed IP	Select this if your ISP assigned you a static IP address.
Address
My WAN IP	Enter the IP address provided by your ISP.
Address
Remote IP	Enter the IP address your ISP provided for the remote (peer) server.
Address
Remote IP Subnet	Enter the subnet mask your ISP provided for the remote server.
Mask
Metric	Usually, you should keep the default value. This field is related to RIP. See Chapter
	7 on page 117 for more information.
	The metric represents the "cost of transmission". A router determines the best
	route for transmission by choosing a path with the lowest "cost". The smaller the
	metric, the lower the "cost". RIP uses hop count as the measurement of cost,
	where 1 is for a directly-connected network. The metric must be 1-15; if you use a
	value higher than 15, the routers assume the link is down.
Private	Usually, you should keep the default value. This field is related to RIP. See Chapter
	7 on page 117 for more information.
	This field determines whether or not the ZyXEL Device includes the route to this
	remote node in its RIP broadcasts. If you select Yes, this route is not included in
	RIP broadcast. If you select No, the route to this remote node is propagated to
	other hosts through RIP broadcasts.
WAN MAC
Address
Spoof WAN MAC	Select this if you do not want to use the default MAC address for the ZyXEL
Address	Device.
Clone the	This field is enabled if you select Spoof WAN MAC Address.
computer’s MAC	Enter the IP address of the computer whose MAC address you want the ZyXEL
address - IP
	Device to use instead of the default MAC address.
Address
Apply	Click this to save your changes and to apply them to the ZyXEL Device.
Cancel	Click this to set every field in this screen to its last-saved value.

6.2.4 WAN Advanced Screen

Use this screen to set up DNS servers, RIP, and Windows Networking policies for the WAN. To access this screen, click Network > WAN > Advanced.

112 Chapter 6 WAN