Use this screen to set up the ZyXEL Device as a dynamic DNS client. To access this screen, click Maintenance > System > Dynamic DNS.
Figure 141 Maintenance > System > Dynamic DNS
Each field is described in the following table.
Table 105 Maintenance > System > Dynamic DNS
LABEL | DESCRIPTION |
|
|
Dynamic DNS |
|
Setup |
|
Enable Dynamic | Select this to use dynamic DNS. |
DNS |
|
Service Provider | Select the name of your Dynamic DNS service provider. |
|
|
Dynamic DNS | Select the type of service that you are registered for from your Dynamic DNS |
Type | service provider. |
Host Name | Enter the host name. You can specify up to two host names, separated by a |
| comma (","). |
User Name | Enter your user name. |
|
|
Password | Enter the password assigned to you. |
|
|
Enable Wildcard | Select this to enable the DynDNS Wildcard feature. |
Option |
|
Enable offline | This field is available when CustomDNS is selected in the DDNS Type field. |
option | Select this if your Dynamic DNS service provider redirects traffic to a URL that you |
| can specify while you are off line. Check with your Dynamic DNS service provider. |
IP Address Update |
|
Policy |
|
Chapter 20 System | 247 |