Table 26 Status Screen
LABEL | DESCRIPTION |
|
|
Rate | If the interface uses Ethernet encapsulation, this column displays the port speed |
| and the Ethernet duplex setting. Duplex settings are: |
| Full - The ZyXEL Device is using |
| Half - The ZyXEL Device is using |
| You cannot change the Ethernet duplex setting in the ZyXEL Device. |
| If this interface uses PPPoE encapsulation, this column displays the port speed |
| and the status of the call. |
| Down - The connection is not available. |
| Dial - The ZyXEL Device is making the call. |
| Idle - The call is connected. |
| Drop - The ZyXEL Device is ending the call. |
| The LAN interface always uses Ethernet encapsulation. You can change the |
| encapsulation of the WAN interface in Network > WAN > Internet Connection. |
| For the WLAN interface, it displays the transmission rate when WLAN is enabled |
| or N/A when WLAN is disabled. |
Summary |
|
|
|
Any IP Table | Click (Details ...) to open the Any IP Table window. See Section 4.2 on page 81. |
|
|
DHCP Table | Click (Details ...) to open the DHCP Table window. See Section 4.3 on page 81. |
|
|
VoIP Statistics | Click (Details ...) to open the VoIP Statistics window. See Section 4.4 on page 82. |
|
|
BW MGMT | Click (Details ...) to open the BW MGMT Monitor window. See Section 4.5 on |
Monitor | |
Packet Statistics | Click (Details ...) to open the Packet Statistics window. See Section 4.6 on page |
| 86. |
VoIP Status |
|
|
|
Account | This column displays each SIP account in the ZyXEL Device. |
|
|
Registration | This field displays the current registration status of the SIP account. You have to |
| register SIP accounts with a SIP server to use VoIP. |
| If the SIP account is already registered with the SIP server, |
| • Click Unregister to delete the SIP account’s registration in the SIP server. This |
| does not cancel your SIP account, but it deletes the mapping between your SIP |
| identity and your IP address or domain name. |
| • The second field displays Registered. |
| If the SIP account is not registered with the SIP server, |
| • Click Register to have the ZyXEL Device attempt to register the SIP account |
| with the SIP server. |
| • The second field displays the reason the account is not registered. |
| Inactive - The SIP account is not active. You can activate it in VoIP > SIP > SIP |
| Settings. |
| Not Register - The SIP account is active, but you have not tried to register it yet. |
| Register Fail - The last time the ZyXEL Device tried to register the SIP account |
| with the SIP server, the attempt failed. |
URI | This field displays the account number and service domain of the SIP account. You |
| can change these in VoIP > SIP > SIP Settings. |
80 | Chapter 4 Status Screens |