P-2302HW/HWL-P1 Series User’s Guide

Figure 67 Network > NAT > Port Forwarding

Each field is described in the following table.

Table 55 Network > NAT > Port Forwarding

LABEL

DESCRIPTION

 

 

Default Server

 

Setup

 

Default Server

Enter the IP address of the server to which the ZyXEL Device should forward

 

packets for ports that are not specified in the Port Forwarding section below or in

 

the Management > Remote MGMT screens. Enter 0.0.0.0 if you want the ZyXEL

 

Device to discard these packets instead.

Port Forwarding

 

 

 

#

This field is a sequential value, and it is not associated with a specific rule. The

 

sequence is important, however. The ZyXEL Device checks each rule in order, and

 

it only follows the first one that applies.

Active

Select this to enable this rule. Clear this to disable this rule.

 

 

Name

This field displays the name of the rule. It does not have to be unique.

 

 

Start Port

This field displays the beginning of the range of port numbers forwarded by this

 

rule.

End Port

This field displays the end of the range of port numbers forwarded by this rule. If it

 

is the same as the Start Port, only one port number is forwarded.

Server IP Address

This field displays the IP address of the server to which packet for the selected

 

port(s) are forwarded.

Modify

This column provides icons to edit and delete rules.

 

To edit a rule, click the Edit icon next to the rule. The NAT Port Forwarding Edit

 

screen appears.

 

To delete a rule, click the Remove icon next to the rule. All the information in the

 

rule returns to the default settings.

Chapter 8 NAT

135