CHAPTER 18
Remote MGMT
Use these screens to control which computers can use which services to access the ZyXEL Device on each interface.
18.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which ZyXEL Device interface (if any) from which computers.
You may manage your ZyXEL Device from a remote location via:
• | Internet (WAN only) | • | ALL (LAN and WAN) |
• | LAN only | • | Neither (Disable). |
To disable remote management of a service, select Disable in the corresponding Server Access field.
You may only have one remote management session running at a time. The ZyXEL Device automatically disconnects a remote management session of lower priority when another remote management session of higher priority starts. The priorities for the different types of remote management sessions are as follows.
1Telnet
2HTTP
18.1.1Remote Management Limitations
Remote management over LAN or WAN will not work when:
1You have disabled that service in one of the remote management screens.
2The IP address in the Secured Client IP field does not match the client IP address. If it does not match, the ZyXEL Device will disconnect the session immediately.
3There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time.
18.1.2Remote Management and NAT
When NAT is enabled:
Chapter 18 Remote MGMT | 219 |