ZyXEL Communications P-2302HW-P1 Series, P-2302HWL-P1 Series manual 137

P-2302HW/HWL-P1 Series User’s Guide

Figure 69 Network > NAT > Trigger Port

Each field is described in the following table.

Table 57 Network > NAT > Trigger Port

LABEL	DESCRIPTION
Name	Enter a name to identify this rule. You can use 1 - 15 printable ASCII characters, or
	you can leave this field blank. It does not have to be a unique name.
Incoming
Start Port	Enter the incoming port number or range of port numbers you want to forward to
End Port	the IP address the ZyXEL Device records.
	To forward one port number, enter the port number in the Start Port and End Port
	fields.
	To forward a range of ports,
	• enter the port number at the beginning of the range in the Start Port field
	• enter the port number at the end of the range in the End Port field.
	If you want to delete this rule, enter zero in the Start Port and End Port fields.
Trigger
Start Port	Enter the outgoing port number or range of port numbers that makes the ZyXEL
End Port	Device record the source IP address and assign it to the selected incoming port
	number(s).
	To select one port number, enter the port number in the Start Port and End Port
	fields.
	To select a range of ports,
	• enter the port number at the beginning of the range in the Start Port field
	• enter the port number at the end of the range in the End Port field.
	If you want to delete this rule, enter zero in the Start Port and End Port fields.

Chapter 8 NAT 137