P-2302HW/HWL-P1 Series User’s Guide

17.2.3 Bandwidth Class Edit Screen

Use this screen to configure a bandwidth management class.

Note: For each interface, you must enable bandwidth management before you can configure classes.

To access this screen, click Add Sub-Class in Management > Bandwidth MGMT > Class Setup.

Figure 116 Management > Bandwidth MGMT > Class Setup > Edit

See Appendix F on page 327 for examples of services for which you might create bandwidth classes. Each field is described in the following table.

Table 93 Management > Bandwidth MGMT > Class Setup > Edit

LABEL

DESCRIPTION

 

 

 

This section lets you set the budget and priority for this class.

 

 

Class Name

Finish the auto-generated name, or enter a descriptive name up to 20

 

alphanumeric characters long. Spaces are allowed.

Bandwidth Budget

Enter the maximum bandwidth for the class, in kbps. The recommendation is 20 -

 

20000 kbps for each class.

Priority

Enter the priority of this class. The higher the number, the higher the priority. Legal

 

values are 0 - 7. The default setting is 3.

Chapter 17 Bandwidth MGMT

215