After all the routing information is updated, the computer can access the ZyXEL Device and the Internet as if it is in the same subnet as the ZyXEL Device.
7.2 LAN Screens
7.2.1 LAN IP Screen
Use this screen to set up the ZyXEL Device’s IP address and subnet mask. To access this screen, click Network > LAN > IP.
Figure 58 Network > LAN > IP
Each field is described in the following table.
Table 48 Network > LAN > IP
LABEL | DESCRIPTION |
|
|
IP Address | Enter the IP address of the ZyXEL Device on the LAN. |
| Note: This field is the IP address you use to access the ZyXEL |
| Device on the LAN. If the web configurator is running on a |
| computer on the LAN, you lose access to the web |
| configurator as soon as you change this field and click Apply. |
| You can access the web configurator again by typing the new |
| IP address in the browser. |
|
|
IP Subnet Mask | Enter the subnet mask of the LAN. |
|
|
Apply | Click this to save your changes and to apply them to the ZyXEL Device. |
|
|
Cancel | Click this to set every field in this screen to its |
|
|
7.2.2 LAN DHCP Setup Screen
Use this screen to enable, disable, and configure the DHCP server in the ZyXEL Device. To access this screen, click Network > LAN > DHCP Setup.
122 | Chapter 7 LAN |