Figure 11 Connection Wizard > System Information
The following table describes the labels in this screen.
Table 6 Connection Wizard > System Information
LABEL | DESCRIPTION |
|
|
System Name | Enter your computer's "Computer Name". See Section 20.1 on page 243 for more |
| information. This is for identification purposes, but some ISPs also check this field. |
| This name can be up to 30 alphanumeric characters long. Spaces are not allowed, |
| but dashes |
Domain Name | Enter the domain name entry that is sent to DHCP clients on the LAN. If you leave |
| this blank, the domain name obtained from the ISP is used. Use up to 38 |
| alphanumeric characters. Spaces are not allowed, but dashes |
| are accepted. |
< Back | Click this to go to the previous screen. |
|
|
Next > | Click this to go to the next screen. |
|
|
Exit | Click this to close this screen and return to the main screen. |
|
|
Use the following screens to set up your wireless LAN.
3.2.3.1 Wireless LAN - General Information
Configure your wireless settings in this screen, then click Next.
54 | Chapter 3 Wizard Setup |