P-2302HW/HWL-P1 Series User’s Guide

Note: You cannot use the Connection Wizard to set up your Internet connection in the following situations:

-You subscribe to a Roadrunner service.

-You use PPPoE encapsulation and the remote server cannot be discovered automatically.

In these cases, you must use the screens discussed in Chapter 6 on page 105.

Note: Some ISPs, such as Telstra, send UDP heartbeat packets to verify that the customer is still online. In this case, you have to create a WAN to LAN firewall rule for those packets. Contact your ISP to find the correct port number.

3.2.1 Welcome

Figure 10 Connection Wizard > Welcome

The following table describes the labels in this screen.

Table 5 Connection Wizard > Welcome

LABEL

DESCRIPTION

 

 

< Back

Click this to go to the previous screen.

 

 

Next >

Click this to go to the next screen.

 

 

Exit

Click this to close this screen and return to the main screen.

 

 

3.2.2 System Information

Note: Usually, you should just click Next in this screen.

Chapter 3 Wizard Setup

53