P-2302HW/HWL-P1 Series User’s Guide

The following table describes the labels in this screen.

Table 10 Manually Assign a WEP key

LABEL

DESCRIPTION

 

 

Do you want to

Select Yes and the ZyXEL Device will automatically start OTIST once you finish the

enable OTIST

configuration wizard.

 

Select No if you do not want to use OTIST.

 

Note: You must Start OTIST in the ZyXEL Device and in the wireless

 

device(s) within three minutes of each other. You can start

 

OTIST in the wireless devices and the ZyXEL Device in any

 

order.

 

 

Setup Key

Type a key (password) 8 ASCII characters long.

 

Note: If you change the OTIST setup key in the ZyXEL Device, you

 

must change it on the wireless devices too.

Back

Click Back to display the previous screen.

 

 

Next

Click Next to proceed to the next screen.

 

 

Exit

Click Exit to close the wizard screen without saving.

3.2.4 ISP Parameters

This screen depends on the Connection Type you select.

3.2.4.1 Ethernet

Note: You cannot use the Connection Wizard if you subscribe to a Roadrunner service. You must use the screens discussed in Chapter 6 on page 105 instead.

58

Chapter 3 Wizard Setup