P-2302HW/HWL-P1 Series User’s Guide

Figure 140 Maintenance > System > General

Each field is described in the following table.

Table 104 Maintenance > System > General

LABEL

DESCRIPTION

 

 

System Setup

 

 

 

System Name

Enter your computer's "Computer Name". This is for identification purposes, but

 

some ISPs also check this field. This name can be up to 30 alphanumeric

 

characters long. Spaces are not allowed, but dashes “-” and underscores "_" are

 

accepted.

Domain Name

Enter the domain name entry that is propagated to DHCP clients on the LAN. If you

 

leave this blank, the domain name obtained from the ISP is used. Use up to 38

 

alphanumeric characters. Spaces are not allowed, but dashes “-” and periods "."

 

are accepted.

Administrator

Enter the number of minutes a management session can be left idle before the

Inactivity Timer

session times out. After it times out, you have to log in again. A value of "0" means

 

a management session never times out, no matter how long it has been left idle.

 

This is not recommended. Long idle timeouts may have security risks. The default

 

is five minutes.

Password Setup

 

 

 

Old Password

Enter the current password you use to access the ZyXEL Device.

 

 

New Password

Enter the new password for the ZyXEL Device. You can use up to 30 characters.

 

As you type the password, the screen displays an asterisk (*) for each character

 

you type.

Retype to Confirm

Type the new password again.

 

 

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

 

 

Cancel

Click this to set every field in this screen to its last-saved value.

 

 

246

Chapter 20 System