Table 133 Firmware Features
FEATURE | DESCRIPTION |
|
|
Device Management | Use the web configurator to easily configure the rich range of features |
| on the ZyXEL Device. |
Firmware Upgrade | Download new firmware (when available) from the ZyXEL web site and |
| use the web configurator, an FTP or a TFTP tool to put it on the ZyXEL |
| Device. |
| Note: Only upload firmware for your specific model! |
IEEE 802.11g Wireless LAN | The ZyXEL Device can serve as an IEEE 802.11g wireless access point. |
| Expand your network by allowing IEEE 802.11g and IEEE 802.11b |
| devices to connect to your network. |
Wireless Security | The ZyXEL Device supports WEP encryption for basic security as well |
| as WPA and WPA2 security standards. |
| You can also use OTIST to easily configure your wireless security on |
| both your ZyXEL Device and compatible wireless clients. |
MAC Address Filter | Allow or deny access to your wired or wireless network based on the |
| MAC addresses of the computers communicating with your network. |
Any IP | The Any IP feature allows a computer to access the Internet and the |
| ZyXEL Device without changing the network settings (such as IP |
| address and subnet mask) of the computer, when the IP addresses of |
| the computer and the ZyXEL Device are not in the same subnet. |
Configuration Backup & | Make a copy of the ZyXEL Device’s configuration and put it back on the |
Restoration | ZyXEL Device later if you decide you want to revert back to an earlier |
| configuration. |
Network Address | Each computer on your network must have its own unique IP |
Translation (NAT) | address.Use NAT to convert a single public IP address to multiple |
| private IP addresses for the computers on your network. |
Port Forwarding | If you have a server (mail or web server for example) on your network, |
| then use this feature to let people access it from the Internet. |
DHCP (Dynamic Host | Use this feature to have the ZyXEL Device assign IP addresses, an IP |
Configuration Protocol) | default gateway and DNS servers to computers on your network. |
Dynamic DNS Support | With Dynamic DNS (Domain Name System) support, you can use a |
| fixed URL, www.zyxel.com for example, with a dynamic IP address. You |
| must register for this service with a Dynamic DNS service provider. |
IP Multicast | IP Multicast is used to send traffic to a specific group of computers. The |
| ZyXEL Device supports versions 1 and 2 of IGMP (Internet Group |
| Management Protocol) used to join multicast groups (see RFC 2236). |
IP Alias | IP Alias allows you to subdivide a physical network into logical networks |
| over the same Ethernet interface with the ZyXEL Device itself as the |
| gateway for each subnet. |
Time and Date | Get the current time and date from an external server when you turn on |
| your ZyXEL Device. You can also set the time manually. These dates |
| and times are then used in logs. |
Logging and Tracing | Use packet tracing and logs for troubleshooting. You can send logs from |
| the ZyXEL Device to an external UNIX syslog server. |
PPPoE | PPPoE mimics a |
|
|
Universal Plug and Play | The ZyXEL Device can communicate with other UPnP enabled devices |
(UPnP) | in a network. |
284 | Appendix A Product Specifications |