ZyXEL Communications P-2302HW-P1 Series, P-2302HWL-P1 Series 10.2Phone Screens, 10.2.1 Analog Phone Screen, VoIP > Phone > Analog Phone

P-2302HW/HWL-P1 Series User’s Guide

1When you are on the phone talking to someone, place the flash key to put the caller on hold and get a dial tone.

2Dial a phone number directly to make another call.

3When the second call is answered, press the flash key, wait for the sub-command tone and press “3” to create a three-way conversation.

4Hang up the phone to drop the connection.

5If you want to separate the activated three-way conference into two individual connections (one is on-line, the other is on hold), press the flash key, wait for the sub- command tone and press “2”.

10.2Phone Screens

10.2.1 Analog Phone Screen

Use this screen to control which SIP accounts and PSTN line each phone uses. To access this screen, click VoIP > Phone > Analog Phone.

Figure 79 VoIP > Phone > Analog Phone

Each field is described in the following table.

Table 65 VoIP > Phone > Analog Phone

LABEL	DESCRIPTION
Phone Port	Select the phone port you want to see in this screen. If you change this field, the
Settings	screen automatically refreshes.
Outgoing Call Use
SIP1	Select this if you want this phone port to use the SIP1 account when it makes calls.
	If you select both SIP accounts, the ZyXEL Device tries to use the SIP account
	which was registered last.

Chapter 10 Phone 159