P-2302HW/HWL-P1 Series User’s Guide

Figure 91 VoIP > Trunking > Peer Call

Each field is described in the following table.

Table 75 VoIP > Trunking > Peer Call

LABEL

DESCRIPTION

 

 

Outgoing

You need to set up accounts for the peer devices you use in VoIP trunking. This is

Authentication

the IP address of the remote peer device, as well as the username and password

 

needed to authenticate with the remote peer device.

#

This is an index number of your outgoing authentication accounts.

 

 

Name

Enter a descriptive name for the remote peer device of this account. For example,

 

if the peer device is located in London, you might enter London as the account

 

name. This name is used when you configure call rules in the VoIP > Trunking >

 

Call Rules screen.

Username

Enter the username needed to authenticate at the remote peer device. The remote

 

peer device must have the same username in an incoming authentication entry in

 

order to authenticate your connection. Enter up to 32 alphanumeric characters.

178

Chapter 13 VoIP Trunking