P-2302HW/HWL-P1 Series User’s Guide

•Use the ZyXEL Device’s WAN IP address when configuring from the WAN.

•Use the ZyXEL Device’s LAN IP address when configuring from the LAN.

18.1.3System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds). The ZyXEL Device automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the SYSTEM General screen.

18.2 Remote Management Screens

18.2.1 WWW Screen

Use this screen to control HTTP access to your ZyXEL Device. To access this screen, click Management > Remote MGMT > WWW.

Figure 118 Management > Remote MGMT > WWW

Each field is described in the following table.

Table 95 Management > Remote MGMT > WWW

LABEL

DESCRIPTION

 

 

Server Port

Enter the port number this service can use to access the ZyXEL Device. The

 

computer must use the same port number.

Server Access

Select the interface(s) through which a computer may access the ZyXEL Device

 

using this service.

Secured Client IP

Select All to allow any computer to access the ZyXEL Device using this service.

Address

Select Selected to only allow the computer with the IP address that you specify to

 

access the ZyXEL Device using this service.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

 

 

Cancel

Click this to set every field in this screen to its last-saved value.

 

 

220

Chapter 18 Remote MGMT