P-2302HW/HWL-P1 Series User’s Guide

Use this screen to make the ZyXEL Device assign a specific IP address to a specific computer on the LAN. To access this screen, click Network > LAN > Static DHCP.

Figure 60 Network > LAN > Static DHCP

Each field is described in the following table.

Table 50 Network > LAN > Static DHCP

LABEL

DESCRIPTION

 

 

#

This field is a sequential value. It is not associated with a specific entry.

 

 

MAC Address

Enter the MAC address of the computer to which you want the ZyXEL Device to

 

assign the same IP address.

IP Address

Enter the IP address you want the ZyXEL Device to assign to the computer.

 

 

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

 

 

Cancel

Click this to set every field in this screen to its last-saved value.

 

 

7.2.4 LAN Client List Screen

Note: This screen is empty if the DHCP server is not enabled. You can enable it in Network > LAN > DHCP Setup.

Use this screen to look at the IP addresses the ZyXEL Device has assigned to DHCP clients on the LAN. To access this screen, click Network > LAN > Client List.

124

Chapter 7 LAN