Oregon Scientific WMR200 RADIO-CONTROLLED / Atomic Clock, Remote Wind Sensor Unit, FCC Statement

Page 12

Memory

Current, Min and Max

Alarm

Hi / Lo

RADIO-CONTROLLED / ATOMIC CLOCK

Synchronization

Auto or disabled

Clock display

HH:MM:SS

Hour format

12hr AM/PM or 24hr

Calendar

DD/MM or MM/DD

Weekday in 5 languages

(E, G, F, I, S)

Battery

4 x UM-3 (AA) 1.5V batteries

 

AC adapter 6V

REMOTE WIND SENSOR UNIT

Dimensions (L x W x H)

178 x 76 x 214 mm (7 x 3 x 8.4 inches)

Weight

100 g (3.53 oz) without battery

Wind speed unit

m/s, kph, mph, knots

Speed accuracy

2 m/s ~ 10 m/s (+/- 3 m/s)

 

10 m/s ~ 56 m/s (+/- 10%)

Direction accuracy

16 positions

Transmission of

Approx. every 14 seconds

wind speed signal

 

Memory

Max speed gust

Battery

2 x UM-3 (AA) 1.5V batteries

OUTDOOR TEMPERATURE / HUMIDITY UNIT

RELATIVE TEMPERATURE

Dimensions

115 x 87 x 118 mm

(L x W x H)

(4.5 x 3.4 x 4.6 inches)

Weight

130 g (4.59 oz) without battery

Temp. unit

°C / °F

Displayed range

-50°C to 70°C (-58°F to 158°F)

Operating range

-30°C to 60°C (-4°F to 140°F)

Accuracy

-20°C – 0°C: +/- 2°C (+/- 4.0°F)

 

0°C - 40°C: +/- 1°C (+/- 2.0°F)

 

40°C - 50°C: +/- 2°C (+/- 4.0°F)

 

50°C - 60°C: +/- 3°C (+/- 6.0°F)

Comfort

20°C to 25°C (68°F to 77°F)

Memory

Current, Min and Max temp.

 

Dew Point w/ Max and Min

 

Wind chill temp. and min

• RELATIVE HUMIDITY

 

Displayed range

2% to 98%

Operating range

25% to 90%

Resolution

1%

Accuracy

25% - 40%: +/- 7%

 

40% - 80%: +/- 5%

 

80% - 90%: +/- 7%

Comfort

40% to 70%

Memory

Current, Min and Max

Battery

2 x UM-4 (AAA) 1.5V batteries

RF TRANSMISSION

RF frequency

433MHz

Range

Up to 100 meters (328 feet) with

 

no obstructions

Transmission

Approx. every 60 seconds

No. of Channel

1 for Wind/ Rain/ UV and 10 for

 

Temp. / Humidity

REMOTE RAIN GAUGE

Dimensions

114 x 114 x 145 mm

(L x W x H)

(4.5 x 4.5 x 5.7 inches)

Weight

241g (8.50 oz) without battery

Rainfall unit

mm/hr and in/hr

Range

0 mm/hr – 9999 mm/hr

Resolution

1 mm/hr

Accuracy

< 15 mm/hr: +/- 1 mm

 

15 mm to 9999 mm: +/- 7%

Memory

Past 24hrs, hourly and accumulated

 

from last memory reset

Battery

2 x UM-3 (AA) 1.5V

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientific, declares that this Professional Weather Center (Models: WMR200 / WMR200A) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.

COUNTRIES RTTE APPROVAL COMPLIED

All EU countries, Switzerland

CH

and Norway

N

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for support or sales. Please visit our website at www2.oregonscientific.com/service for all enquiries.

We

 

Name:

Oregon Scientific, Inc.

Address:

19861 SW 95th Ave.,Tualatin,

 

Oregon 97062 USA

Telephone No.:

1-800-853-8883

declare that the product

 

Product No.:

WMR200 / WMR200A

Product Name:

Professional Weather Center

Manufacturer:

IDT Technology Limited

Address:

Block C, 9/F, Kaiser Estate,

 

Phase 1,41 Man Yue St.,

 

Hung Hom, Kowloon,

 

Hong Kong

is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.

EN

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you’re in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support.asp

For international inquiries, please visit: www2.oregonscientific.com/about/ international.asp

11

Image 12
Contents Professional Weather Center Model WMR200 / WMR200A Contents Packaging Contents Base StationWind Sensor / Temperature & Humidity Sensor IntroductionAssembly Parts Accessories SensorsOverview Front View Back ViewClock / Moon Phase Indoor Temperature and HumidityBAR Chart Outdoor Temperature / HumidityWind Sensor Getting Started SET UP Remote Wind Sensor Outdoor Temperature / Humidity SensorSET UP Remote Temperature / Humidity Sensor Remote Unit Assembly To mount the temperature / humidity sensorSolar panel facing If you reside To mount the wind sensorAlternative SET UP Remote Wind Sensor on Existing Pole SET UP Rain GaugeTo set up the Rain Gauge To ensure a level planeGetting Started SET UP Base Station Insert BatteriesSensor Data Transmission Clock Clock ReceptionTemperature and Humidity Temperature and Humidity TrendsMoon Phase PressureAlarm SET UP Software First Time USEInstall Software Memory MAX / MIN RecordsDisable Sleep Mode To Disable Sleep Mode on Computer Windows XPTo Disable Sleep Mode on Computer Windows Vista Software UpdatesOutdoor Temperature / Humidity Unit RADIO-CONTROLLED / Atomic ClockRemote Wind Sensor Unit RF TransmissionContenido IntroducciónContenidos DEL Embalaje Unidad Principal Sensor DE Viento / Sensor DE Temperatura Y HumedadComponentes DE Montaje Vista TraseraPantalla LCD Accesorios SensoresDiagrama DE Barras PrecipitaciónUVA Reloj / Fase DE LA LunaConfiguración DEL Sensor Remoto DE Temperatura Y Humedad Sensor DE VientoSensor DE Temperatura Y Humedad Exterior Para Empezar Instalación DEL Sensor DE VientoMontaje DE LOS Sensores Incluidos Para montar el sensor de Temperatura y humedadPanel solar encarado hacia Si vive en Norte Hemisferio sur Sur Hemisferio norteMontaje DEL Medidor DE Lluvia Panel solar en su sitioTornillo Ángulo deseadoPara Empezar Montaje DE LA Unidad Principal Cómo Introducir LAS PilasTransmisión DE Datos DEL Sensor Reloj Recepción DEL RelojAjuste Manual DEL Reloj PresiónAjuste DE Altura Precipitación AcumuladaAlarma Configuracion DEL Software Primera VEZ QUE SE UtilizaFase DE LA Luna Memoria Registros MÁX / MÍNPaso Adicional Solo Para Usuarios DE Windows Vista Instalación DEL SoftwareDeshabilitar EL Modo Inactividad Subir Datos AL Software DEL PCFicha Técnica Unidad Principal Barómetro InteriorTemperatura Interior Humedad Relativa InteriorEU Declaración DE Conformidad Bajo LA Directiva RtteInhalt EinleitungLieferumfang Basisstation Windmesser / TEMPERATUR- UND LuftfeuchtigkeitssensorBauelemente Zubehör SendeeinheitenÜbersicht Vorderansicht RückansichtUHR / Mondphase RegenfallInnentemperatur UND Luftfeuchtigkeit Windgeschwindigkeit / -RICHTUNG / WindkühlungBalkendiagramm AUSSENTEMPERATUR- / Luftfeuchtigkeitssensor WindmesserErste Schritte DEN Externen Windmesser Einrichten Unterteil und TrichterMontage DER Externen Einheit So montieren Sie den Temperatur- / LuftfeuchtigkeitssensorSonnenkollektor zeigt nach Sie befinden sich auf der Norden Südlichen Halbkugel Süden Nördlichen HalbkugelSo montieren Sie den Windmesser Die montierte externe Einheit befestigenDEN Regenmesser Einrichten Erste Schritte DIE Basisstation EinrichtenBatterien Einlegen So garantieren Sie eine ebene FlächeFunkuhr Zeitsignalempfang Datenübertragung DER SendeeinheitDIE UHR Manuell Einstellen LuftdruckMondphase BalkendiagrammWettervorhersage Temperatur UND LuftfeuchtigkeitInstallation DER Software MAX. / MIN. DatensätzeStündliche Datensätze DatenloggerUpdate DER Software Schlafmodus AusschaltenAusschalten DES Schlafmodus Windows XP Ausschalten DES Schlafmodus Windows VistaFunkgesteuerte / Atomuhr Externes WindmessgerätAussentemperatur / Luftfeuchtigkeit FunkübertragungTable DES Matieres Contenu DE L’EMBALLAGE Station DE BaseANEMOMETRE-GIROUETTE / Thermo Hygrometre Panneau SolaireAccessoires Capteurs PluviometrePieces D’ASSEMBLAGE Façade ArriereHeure / Phase Lunaire Temperature / Humidite ExterieuresTemperature ET Humidite Interieures VUE Detaillee DE L’AFFICHAGE LCD BarometreBAR Chart Thermo Hygrometre Demarrage Installation DE L’ANEMOMETREInstallation des piles Anemometre / GirouetteInstallation DU Thermo Hygrometre Montage D’UN CapteurPour monter le capteur de température / humidité Panneau solaire orienté Si vous habitezPour monter le capteur de vent Panneau solaire orientéNord Demarrage Installation DE LA Station DE Base Installation DES PilesAutre Montage Thermo Hygrometre Montage Separe Montage DU PluviometreHeure Reception DE L’HEURE Reglage Manuel DE L’HEUREPression Reglage DE L’ALTITUDETemperature ET Humidite Tendances DE Temperature ET HumiditePhase DE LA Lune AlarmeInstallation DU Logiciel Premiere Utilisation Installation DU LogicielDésactiver LE Mode Veille Pour Désactiver LE Mode Veille DE L’ORDINATEUR Windows XPTemperature Interieure Unite DE Temperature / Humidite ExterieuresChargement DE Donnees SUR LE Logiciel DU PC Mises a Jour DE LogicielTransmission Radio Pluviometre a DistancePropos D’OREGON Scientific Europe Déclaration DE Conformité Humidité relativeIndice IntroduzioneContenuto Della Confezione Stazione Base Pannello SolareAccessori E Sensori Pluviometro PanoramicaVista Anteriore Parti PER IL Montaggio Vista PosterioreVisualizzazione Dettagliata DEL Display Barometro PrecipitazioniORA / Fase Lunare Temperatura E Umidità EsternaGrafico a Barre Sensore DI Temperatura E Umidità Esterne Sensore DI Direzione E Velocità DEL VentoPluviometro Base e imbutoMontaggio DELL’UNITÀ Remota Montaggio del sensore di temperatura e umiditàPannello solare orientato Se ci si trova Verso Montaggio del sensore di direzione del vento Fissaggio dell’unità remota montataPannello solare orientato verso Se ci si trova Installazione DEL Pluviometro Operazioni Preliminari Installazione Della Stazione BaseInserimento Delle Batterie Trasmissione DEI Dati DEL SensoreOrologio Ricezione DELL’ORA Impostazione Manuale DELL’ORAPressione Impostazione DELL’ALTITUDINEFunzione DI Ricerca Automatica Tendenze DI Temperatura E UmiditàIndice DI Calore VentoInstallazione DEL Software Solo LA Prima Volta Installare IL SoftwareRilevazioni Orarie Passaggio Aggiuntivo Solo PER Utenti DI Windows VistaAggiornamenti Software Specifiche Tecniche Stazione BaseBarometro Interno Temperatura InternaTrasmissione RF Pluviometro RemotoInformazioni SU Oregon Scientific Dichiarazione DI CONFORMITA’ UEIntroductie InhoudInhoud VAN DE Verpakking WIND- / TEMPERATUUR- / VochtigheidssensorAccessoires Sensoren OnderdelenOverzicht Voorkant AchterkantStaafdiagram NeerslagKlok / Maanstand Buitentemperatuur / -VOCHTIGHEIDWindsensor BUITENTEMPERATUUR- EN -VOCHTIGHEIDSSENSORStarten Instellen Windsensor Instellen BUITENTEMPERATUUR- / -VOCHTIGHEIDSSENSORSensoropstelling Bouwen Temperatuur- en vochtigheidssensor bevestigenRichting zonnepaneel Als u woont op het Noord Zuidelijk halfrond Noordelijk halfrondAlternatieve Opstelling Windsensor OP EEN Bestaande Paal DE Regenmeter OpstellenDe sensoropstelling vastzetten Starten Basisstation Opstellen Plaats DE BatterijenGegevensverzending Sensor Klok Klok OntvangstKlok Handmatig Instellen LuchtdrukHoogte Instellen Totale NeerslagHITTE-INDEX MaanstandGeheugen MAX / MIN Records UurmetingenSoftware Installeren SOFTWARE-UPDATESSoftware Instellen Eerste Gebruik Extra Stappen Alleen Voor Gebruikers VAN Windows VistaKenmerken Specificaties BasisstationBinnenbarometer BinnentemperatuurRF Verzending Draadloze RegenmeterOver Oregon Scientific EU Conformiteits Verklaring Landen DIE Zijn Onderworpen AAN RTT&EConteúdo IntroduçãoConteúdo DA Embalagem Unidade Principal Sensor DE Vento / Sensor DE Temperatura / UmidadePeças DA Montagem Acessórios SensoresVisão Geral Vista Frontal Vista TraseiraChuva Relógio / Fase DA LUATEMPERATURA/UMIDADE Externa TEMPERATURA/UMIDADE InternaSensor DE Vento 1 Sensor DE TEMPERATURA/UMIDADE ExternaIntrodução Ajuste do Sensor Remoto DE Vento Ajuste do Sensor Remoto DE Temperatura / UmidadeMontagem DA Unidade Remota Para montar o sensor de temperatura / umidadePOR Painel solar de frente para o Se você reside noAjuste Alternativo Sensor Remoto DE Vento EM Poste Ajuste do Medidor DE ChuvaPrendendo a unidade remota montada Painel solar de frente para toIntrodução Ajuste DA Estação Base Inserção DAS PilhasTransmissão DE Dados do Sensor Relógio Recepção do RelógioAjuste Manual do Relógio PressãoAjuste DA Altitude Previsão do TempoFases DA LUA Memória Registros MÁX / MÍNRegistros Horários Registrador DE DadosInstalação do Software Primeiro USO Etapa Adicional Apenas Para Usuários do Windows VistaInstalação do Software Desativação do Modo DormirEspecificações Unidade Principal Barômetro InternoUnidade DE Temperatura / Umidade Externa Transmissão DE RFIinnehåll IntroduktionFörpackningens Innehåll Huvudenhet Vindgivare / Temperatur / LUFTFUKTIGHETS-SENSORMontera Delarna Tillbehör SensorerProduktöversikt Framifrån VY BaksidaNederbörd Klock / MånfasInomhustemperatur OCH Luftfuktighet Vindhastighet / Riktning / Kyla I VindenVindgivare Utomhus Temperatur / LuftfuktighetsgivareATT Komma Igång Inställning AV DEN Fjärrstyrda Vindgivaren Ställ in DEN Trådlösa Temperatur / LuftfuktighetsgivarenMontering AV Fjärrenhetspaketet Att montera temperatur / luftfuktighetsgivarenSolcellsriktning Om du bor på Nord Södra halvklotet Syd Norra halvklotetFörankra den hopmonterade fjärrenheten PlatsDen Önskad vinkelMontering AV Regnmätaren ATT Komma Igång ATT Ställa in HuvudenhetenSätta I Batterier SensordataöverföringKlocka Klockmottagning Manuell Inställning AV KlockanTryck Ställ in HöjdTemperatur OCH Luftfuktighetstrender VärmeindexVind MånfasInstallera Mjukvara Första Gången Installera MjukvaraATT Avaktivera Sleep Mode PÅ Datorn Windows XP ATT Avaktivera Sleep Mode PÅ Datorn Windows VistaSpecifikationer Huvudenhet InomhusbarometerInomhustemperatur Inomhus Relativ LuftfuktighetOregon Scientific. All rights reserved. P/N300100027-00011-10
Related manuals
Manual 11 pages 39.46 Kb

WMR200 specifications

The Oregon Scientific WMR200 is a versatile and advanced weather station designed for enthusiasts and professionals alike. Renowned for its user-friendly interface and robust functionality, the WMR200 is an excellent tool for monitoring both indoor and outdoor weather conditions.

One of the main features of the WMR200 is its array of sensors that provide comprehensive weather data. It includes an anemometer for measuring wind speed and direction, a rain gauge for precipitation measurement, and a thermo-hygrometer for tracking temperature and humidity levels. This combination allows users to analyze various weather elements, enhancing their understanding of local climate patterns.

The wireless technology embedded in the WMR200 is another key characteristic. The system utilizes advanced wireless transmission that allows sensors to communicate wirelessly with the main console, reducing the need for cumbersome cables. This feature not only simplifies setup but also enhances the overall aesthetic of the installation. The range of the wireless transmission is impressive, typically covering distances of up to 100 meters, depending on environmental factors.

The main console of the WMR200 features a clear LCD display that provides real-time readings of the collected data. Users can easily switch between various weather parameters, ensuring they have the most pertinent information at their fingertips. Additionally, the console can store historical weather data, enabling users to track changes over time and identify trends.

Another significant advantage of the WMR200 is its compatibility with online weather services. Users can sync their weather station with various online platforms, allowing them to share their data with a broader community or access specific analytical tools. This connectivity extends the utility of the WMR200 beyond individual use, fostering collaboration among amateur meteorologists and enthusiasts.

Furthermore, the WMR200 is designed with durability in mind. The sensors are built to withstand various weather conditions, ensuring accurate readings regardless of the elements. The materials used in the construction of the unit are weather-resistant, making it suitable for outdoor installation.

In summary, the Oregon Scientific WMR200 combines advanced technology with user-friendly design, catering to a diverse audience interested in weather observation. Its comprehensive sensor array, wireless features, historical data storage, and online connectivity make it an essential tool for anyone keen on understanding and monitoring weather dynamics. Whether for personal curiosity or professional applications, the WMR200 stands out as a reliable and effective weather station.