RedMax SGCZ2401S-CA manual OP8, Cutting Work, OP9, Recommended Applications

OP8

OP10

OP12

OP14

English

	8. Operation
	■ CUTTING WORK
OP9
	This machine does cutting not by a rotary cutter like
	conventional trimmers but by a pair of special blades
	that moves round within a limited angle at a speed of
	approximately 1/30 of conventional trimmers. This
	unique mechanism has brought you many benefits as
	following;
	1.	Since the blade does not cause grass chips and
		pebbles to be thrown around, you may use less care
		about your clothing or surrundings.
	2.	Should the blade hit a rogid object like stones, trees
OP11
		or steel poles during operation, it does not produce a
		bounce motion that can cause loss of machine
		control.
	3.	Since the blade does not cause cut grass to wrap
		around the neck, you need not to stop operation to
		remove such wrappers.
	4.	What's more, since the whole circle of the blade is
		available for cutting, you can move the cutting head
		in all directions and cut grass growing on such place
		difficult-to-get by conventional trimmers. You can
		even trim the waterside without splashing water.
OP13
		WARNING
	For your health and to prevent the risk from
	vibration, refrain from working for a long time at
	the cold temperature.
	RECOMMENDED APPLICATIONS:
	•	Parking area (OP8)
	•	Roadside (OP9)
	•	Road edge (OP10)
	•	Near fences (OP11)
	•	Around stones (OP12)
	•	Among trees (OP13)
	•	Waterside (OP14)

36