6. Do not freeze or immerse charger in water or any other liquid. 
Shock hazard. Do not allow any liquid
to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavityWARNING:. Unplug charger before attempting to clean.
to get inside charger. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.
WARNINSTALLINGG:/ REMOVING BATTERY PACK
Make certain the
engaged to prevent switch actuation before removing or installing battery.
TO INSTALL BATTERY PACK: Insert battery pack into tool until an audible click is heard (figure 2).
TO REMOVE BATTERY PACK: Depress the battery release button in the back of the battery pack and pull battery pack out of tool (figure 2).
OPERATION
SWITCH
Toturn the unit “ON”, slide the lock off button, shown in figure 3, forward and, squeeze the trigger switch. Once the unit is running, you may release the lock off button. In order to keep the unit running you must continue to squeeze the trigger. Toturn the unit “OFF”,
releaseWARNINGthe trigger. : Never attempt to lock a switch in the ON position.
TRIMMING INSTRUCTIONS
1. WORKING POSITION – Maintain proper footing and balance and do not overreach. Wear safety goggles, non- skid footwear and rubber gloves when trimming. Hold the unit firmly in both hands and turn the unit ON. Always hold the trimmer, as shown in the illustrations in this manual, with one hand on the switch handle and one hand on the bail handle. (figure 4) Never hold the unit by the blade guard.
8