| FEATURES |
|
|
|
|
| |
|
|
|
|
|
|
|
|
PRODUCT SPECIFICATIONS |
|
| |
Engine | 179cc OHV | ||
Fuel Tank Capacity | 0.96 gal | ||
Oil Capacity | 20.3 oz. | ||
Maximum Pounds Per Square Inch Pressure* | 2,500 psi | ||
Maximum Gallons Per Minute* | 2.3 gpm | ||
Maximum Inlet Water Temperature | 104˚F | ||
*Max. rating determined by PWMA Standard 101, when tested with red nozzle |
|
| |
KNOW YOUR pressure washer
See Figure 1.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
engine switch
The engine switch is used in combination with the recoil starter grip to start the engine. It is also used to turn the engine off.
recoil starter
The recoil starter is pulled to start the machine.
SOAP NOZZLE
The black soap nozzle is used to apply detergent at low pressure only.
SPARK ARRESTOR
This engine is not factory equipped with a spark arrestor. In some areas it is illegal to operate an engine without a spark arrestor. A spark arrestor is available by calling customer service for assistance.
Fuel tank
This fuel tank has a maximum capacity of 0.96 gal. Use unleaded automotive gasoline in the engine.
179cc OHV engine
This engine enables the pressure washer to achieve 2,500 psi (pounds per square inch) at a rate of 2.3 gpm (gallons per minute).
HOSE storage
Once the high pressure hose is rolled, hang it on the back of the machine using the
THERMAL RELEASE VALVE
This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water. Once the water has drained, the thermal relief valve will reset itself.
trigger handle
The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue.
trigger with lock out
Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use.
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
WARNING:
Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
Page 7 — English